How is pump and filter size decided?

Equipment duty is based on the approved pool volume, hydraulic calculations, usage, pipework and operating requirements.

Which is better: dosing or salt chlorination?

Both can work well. Selection depends on the project, operating preference, water conditions and maintenance plan.

Can an existing pump room be upgraded?

Yes. We survey the existing hydraulics, electrical supply, ventilation, drainage and equipment condition before proposing changes.

Do UAE pools need a heater and chiller?

It depends on the required water temperature, season, exposure and operating pattern. The system is selected for the confirmed requirement.

Can the system be automated?

Timers, interlocks, water-treatment controls and selected monitoring can be integrated according to the final scope.

How much plant-room space is required?

Space depends on the pool and equipment. Filters, valves, chemical systems and panels all need safe access and service clearance.

What is included at handover?

The approved scope may include testing records, as-built information, equipment schedules, O&M guidance and operator training.

Where do you provide pool MEP services?

BAB ALFIZA provides pool services across Dubai and Abu Dhabi, subject to project review and scheduling.

Pool MEP & Pump Room Systems Dubai

Chat with us on WhatsApp

Pool MEP & Pump Room Systems Dubai | BAB ALFIZA

Coordinated swimming pool pump room with filters, pumps and control panel

ONE COORDINATED SYSTEM

MORE THAN EQUIPMENT

The System Behind Clear, Comfortable Water

A pool performs properly when every pump, filter, valve, treatment unit, heat exchanger and control is selected and coordinated as part of one hydraulic and electrical system.

Hydraulic Planning

Flow, head and pipe routing based on the approved pool design.

Equipment Selection

Pumps, filters and treatment chosen for the actual duty.

Serviceable Layout

Clear access for valves, filters, chemicals and maintenance.

Testing & Handover

Pressure checks, commissioning and operating guidance.

COMPLETE TECHNICAL SCOPE

Pool MEP Systems We Plan and Install

The final equipment schedule is selected for the approved pool volume, usage, hydraulic design and site requirements.

Circulation Pumps

Duty-selected pumps move water through suction, treatment and return lines.

STRAINERS • VALVES • MANIFOLDS

Filters & Backwash

Sand, media or cartridge filtration arranged for effective operation and practical cleaning.

FILTERS • MULTIPORT • WASTE LINE

Automatic Dosing

Automatic pH and disinfectant dosing with probes, flow cell and controlled injection.

PH CONTROL • DOSING PUMPS

NaCl

Salt Chlorination

Salt chlorination generates disinfectant in the circulation line; pH control may still be integrated.

SALT CELL • CONTROLLER

°C

Heating & Cooling

Heat pump, heater, chiller or heat-exchanger solutions selected for the operating requirement.

HEAT PUMP • CHILLER • BYPASS

Controls & Electrical

Control panels, timers, interlocks and equipment protection coordinated for safe operation.

PANEL • SENSORS • PROTECTION

CONCEPTUAL WATER PATH

How the Pool Water Moves Through the System

A simple overview for clients—the final hydraulic layout follows the approved MEP design.

POOL / BALANCE TANK

Water enters through drains, skimmers or overflow collection.

CIRCULATION PUMPS

Pumps provide the flow required by the treatment system.

FILTRATION

Filters remove suspended debris before treatment.

DOSING OR SALT

Water chemistry and disinfection are controlled.

HEATER / CHILLER

Temperature is adjusted when the project requires it.

POOL RETURNS

Treated water returns through the designed inlets.

Overflow pools may also include a balance tank, level control, make-up water and overflow-specific hydraulic details.

PUMP ROOM PLANNING

A Pump Room Designed as One Complete System

A clean layout is not only about appearance. It supports correct operation, safer access, easier fault finding and practical maintenance over the life of the pool.

Correct equipment duty and pipe routing

Selected and coordinated for the approved hydraulic design.

Balance tank, level control and make-up water

Included for overflow systems where the approved design requires them.

Isolation valves and bypass arrangements

Allow individual components to be serviced where required.

Ventilation, drainage and equipment plinths

Planned for the final room conditions and equipment.

Safe access and service clearances

Space is maintained around filters, pumps and panels.

Noise, vibration and cable coordination

Supports, connections and services are organised for the installation.

Installed pool pump room with clear service access

PUMPS • FILTERS • CONTROLS • SERVICE ACCESS

PLANT ROOM PROTECTION

Safety, Monitoring & Serviceability Built In

The final installation is coordinated for safe operation, practical maintenance and applicable project requirements.

Chemical Storage & Containment

Treatment chemicals are segregated, labelled and contained with safe access according to the final system.

Ventilation & Drainage

Room ventilation, floor drainage, washdown and sump provisions are coordinated for the approved space.

Suction Safety

Suction outlets, grilles and anti-entrapment provisions follow the approved hydraulic and safety design.

Flow & Pressure Monitoring

Flow meters, gauges, level and temperature sensors are included where the system requires them.

Noise & Vibration Control

Mounts, supports and flexible connections are selected to limit transmitted vibration where required.

Identification & Access

Pipes, valves and equipment are organised, labelled and kept accessible for operation and servicing.

AUTHORITY & CONSULTANT COORDINATION — Final layouts, safety provisions, equipment data and approvals follow the project consultant, applicable authorities and manufacturer instructions.

WATER TREATMENT PLANNED FOR THE PROJECT

WATER TREATMENT

Automatic Dosing or Salt Chlorination

The treatment method is selected according to the pool, usage, operating preference and maintenance plan. We configure the equipment so testing, dosing and servicing remain clear and controlled.

Automatic Dosing

Probe-based pH control with automatic disinfectant dosing where specified.

NaCl

Salt Chlorination

A salt cell generates disinfectant in the circulation line; pH control can still be included.

Dosing and salt are selectable solutions—not equipment that must always be installed together. UV or ozone may be considered for defined projects.

YEAR-ROUND TEMPERATURE CONTROL

Pool Heating & Cooling for UAE Conditions

The correct solution depends on pool volume, target temperature, operating hours, indoor or outdoor location and available plant space. Equipment is selected after the project requirements are confirmed.

Heat pumps

Efficient heating and selected cooling options for suitable applications.

Dedicated chillers

Cooling solutions for projects with defined summer temperature targets.

Heat exchangers

Hydraulic separation and material selection according to the water system.

Bypass and control

Isolation, flow proving and temperature control coordinated with the plant.

INDOOR POOLS — Ventilation, dehumidification and condensation control are coordinated with the building HVAC design.

HEATING • COOLING • HEAT EXCHANGE

ELECTRICAL & AUTOMATION

Controls That Protect the Pool Equipment

Control logic is coordinated with the mechanical system and final electrical requirements.

Control Panels

Organised switching and control for pumps, treatment and temperature equipment.

Timers & Sequencing

Operating schedules and equipment sequences aligned with the intended use.

Interlocks & Protection

Flow proving, overload protection and dry-run protection where required.

Alarms, BMS & Monitoring

Status indication, remote alarms or BMS integration can be included for selected projects.

ISO

Emergency Isolation

Accessible isolation and emergency provisions according to the final design.

Earthing & Bonding

Electrical safety coordination by qualified personnel to applicable requirements.

NEW AND EXISTING POOLS

MEP Solutions for Every Project Stage

Start with a complete new pump room or improve an existing system after a technical site review.

New-Build Pool MEP

Coordinated pump-room installation for villas, hotels, resorts and commercial pools.

PLAN A NEW PUMP ROOM →

Pump Room Upgrade

Replace ageing equipment, improve service access and reorganise the treatment system.

DISCUSS AN UPGRADE →

Equipment Replacement

Replace selected pumps, filters, dosing, salt, heater or chiller equipment after assessment.

BOOK A SITE SURVEY →

FROM SURVEY TO HANDOVER

Our Pool MEP Delivery Process

A disciplined sequence keeps equipment selection, installation and commissioning aligned.

Site Survey & Requirements

Pool type, volume, usage, plant space and existing services are reviewed.

Hydraulic & MEP Planning

Flow paths, balance tank, duties, pipe routing, drainage and controls are coordinated.

Equipment Selection

Technical submittals and suitable pumps, filters and treatment are prepared.

Installation & Coordination

Mechanical and electrical equipment is installed with access for servicing.

Testing & Commissioning

Pipework, controls, circulation, treatment and temperature systems are checked.

Handover & Support

As-built records, O&M guidance, operator training and maintenance options are provided.

Completed pool after MEP testing and handover

TESTED • COMMISSIONED • EXPLAINED

QUALITY AT COMPLETION

Testing, Commissioning & Documented Handover

Before handover, the installed systems are checked under the approved project scope. The client or operator receives the records and guidance needed for practical operation and maintenance.

Swimming Pool MEP & Pump Room Works in Dubai & Abu Dhabi

The System Behind Clear, Comfortable Water

Hydraulic Planning

Equipment Selection

Serviceable Layout

Testing & Handover

Pool MEP Systems We Plan and Install

Circulation Pumps

Filters & Backwash

Automatic Dosing

Salt Chlorination

Heating & Cooling

Controls & Electrical

How the Pool Water Moves Through the System

POOL / BALANCE TANK

CIRCULATION PUMPS

FILTRATION

DOSING OR SALT

HEATER / CHILLER

POOL RETURNS

A Pump Room Designed as One Complete System

Correct equipment duty and pipe routing

Balance tank, level control and make-up water

Isolation valves and bypass arrangements

Ventilation, drainage and equipment plinths

Safe access and service clearances

Noise, vibration and cable coordination

Safety, Monitoring & Serviceability Built In

Chemical Storage & Containment

Ventilation & Drainage

Suction Safety

Flow & Pressure Monitoring

Noise & Vibration Control

Identification & Access

Automatic Dosing or Salt Chlorination

Automatic Dosing

Salt Chlorination

Pool Heating & Cooling for UAE Conditions

Heat pumps

Dedicated chillers

Heat exchangers

Bypass and control

Controls That Protect the Pool Equipment

Control Panels

Timers & Sequencing

Interlocks & Protection

Alarms, BMS & Monitoring

Emergency Isolation

Earthing & Bonding

MEP Solutions for Every Project Stage

New-Build Pool MEP

Pump Room Upgrade

Equipment Replacement

Our Pool MEP Delivery Process

Site Survey & Requirements

Hydraulic & MEP Planning

Equipment Selection

Installation & Coordination

Testing & Commissioning

Handover & Support

Testing, Commissioning & Documented Handover

Pipework pressure and leak checks

Pump rotation, priming and circulation

Filter, valve, flow and pressure verification

Treatment setup, calibration and water balance

Heating, cooling and control verification

Electrical protection and alarm checks

As-built drawings, schedules and O&M manuals

Operator training, warranty records and maintenance plan

Planning a New Pump Room or MEP Upgrade?